E4132
Frame Plate Liner Insert (FPL) in R55 Elastomer for 6/4 D
Rear frame plate liner insert in R55 natural anti-abrasive rubber with vulcanized steel backing to absorb fine-particle elastic impact without flat gaskets.
Metallurgical Specifications & Dimensional Interchangeability
| Universal Code: | E4132 (SMAT-PUMP-6X4-FPL) |
|---|---|
| Compatible Frame & Pipe Series: | Slurry pump frame 6/4 D (Series 6X4) |
| Component Type: | Rear Wet-End Chamber Liner Insert |
| Unit Mass & NIOSH Handling: | 9.8 kg — 1-Operator Manual Safe (MANUAL_SAFE • LI=0.88) |
| Critical Wall Thickness: | 26 mm (Elastómero de Caucho Natural Vulcanizado R55 (Shore A 55 ± 5)) |
| Outer Diameter (∅D₂): | 380 mm |
| Max Sphere Passage (Solids): | 12 mm |
| BOM Station & Precedence: | Station 03 — 08. Forro de Plato Posterior E4132 (Estación 03 • Hule R55 / PU) |
| Metallurgy: | Elastómero de Caucho Natural Vulcanizado R55 (Shore A 55 ± 5) |
| Verified Hardness: | 55 ± 5 Shore A (Resiliencia de Rebote ≥ 70%) |
| Critical Application: | Secondary classification, flotation, and fine slurry pumping (d80 < 250 microns) |
| Assembly Guarantee: | Vulcanized studs and perimeter sealing lip verified at Durango Central Warehouse. |
| Everyday Physical Scale (ISO/IEC 7810): | Optimal reference axial clearance δ = 0.76 mm (exact thickness of 1 standard ISO 7810 bank card). |
1:1 Dimensional Fit & Dynamic Balance Assurance
Every E4132 unit is physically matched against standard frame dimensions before dispatch from our Durango Central Warehouse. We ensure 100% drop-in interchangeability with industry-standard frames. Should a standard replacement part fail to fit your pump casing, it is immediately swapped from our floor stock.
Fine-tolerance manufacturing prints and complete internal dimensional matrices are kept off public tables to safeguard intellectual property. Detailed mechanical drawings and compliance dossiers are shared privately with authorized mine plant engineering and procurement teams.