Durango Central Warehouse • Direct Mine Dispatch
Plant Engineering / WhatsApp: (618) 367-0664
ES / EN
Quote Spares
SMAT MINERALS • DURANGO CENTRAL WAREHOUSE • MINERAL PROCESSING SUPPLY

Slurry Pumps & Wear Spares
Flotation Mechanisms, Filter Presses & Pulp Density Scales. Hydrocyclones.

Request Quotation View Exploded BOM & Pump Assembly Hydrocyclones & 3-Cup Marcy Balance Master Catalog (19 SKUs + 13 Codes)
DIRECT PART & EQUIPMENT SELECTION • X-RAY CAD DIAGRAMS

Select Your Spare Part or Plant Supply Area

Door 1 • Slurry Pumping & Wear Spares 1.5x1" to 14x12" • 13 Codes

Slurry Pumps & Spare Parts

5-5-4 Wet-End Lots in High Chrome (≥650 HB), Rubber, PU & SiC + D075C21 Sleeve & Bearing Assembly.

5-5-4 Kit 5-Vane Impeller Cr27% Volute Rubber / PU Liners Throatbush FPL Insert Sleeve D075C21 Dry Expeller Bearing Assembly CV/ZVZ Drive Train
Materials: High Chrome (≥650 HB), Rubber, Polyurethane & SiC Ceramic
Wet-End Lot: 5 Impellers + 5 Throatbushes + 4 Volutes
Assembly Report: How a pump is assembled (14 parts) →
View Parts & Exploded BOM → Quote 5-5-4 Lot
Door 2 • Classification & Fine Screening D6–D20 • TH48-30 • 1'x1'

Hydrocyclones & Urethane Screens

D6–D20 Hydrocyclones (SiC Apex & Vortex Finder), Married Pump + Cyclone Package & TH48-30 / 1'x1' Urethane Screens.

D6–D20 Hydrocyclones (Apex & Vortex) Married Pump + Cyclone Package TH48-30 Fine Screens 1'x1' Polyurethane Modules 3-Cup Marcy Balance (Plitt d50c)
Hydrocyclones: D6, D10, D10B, D15 & D20 Series (5 Zones) →
Urethane Screens: TH48-30 Series & 1'x1' Panels (Weibull α ≥ 4.2)
Hydraulic Pairing: 4x3 + D10 • 6x4 + D15 • 8x6 + D20 (10–12 psi)
View Hydrocyclones & Screens → Quote Married Package
Door 3 • Flotation, Filtration & Lab 50–300 ft³ • 16 bar • SG 2.2–4.4

Flotation Mechanisms, Filter Presses & Control

Suspended Flotation Mechanisms (18 SP, 24, 30), Filter Presses (800–1500 mm, Cloths & Plate Shifter), Marcy Scale & ASTM E11 Sieves.

18 SP / 24 / 30 Flotation Mechanism PP Plates, Cloths & Plate Shifter (16 bar) Marcy Scale + 1000 cm³ Cup Batch Pressure Filter (100 psi) ASTM E11 Sieves & Ro-Tap Process Equipment
Drop-In Flotation: 50 to 300 ft³ • Rougher, Cleaner, and Scavenger (Drop-In Rotor/Diffuser)
Filter Presses: 800 to 1500 mm (16 bar • NOM-141 • Plate Shifter)
Laboratory: Marcy Scale (1000 cm³), ASTM E11 Sieves & Gold Pan
View Equipment & Lab → Quote Equipment
1-CLICK QUICK CHECKOUT • ISO/IEC 7810 (0.76 MM) PHYSICAL SCALE • MULTI-ITEM TRAY (c·μ)

19 Critical Plant SKUs & 13 Verified Atomic Part Sheets

View D075C21 Sheet (Shaft Sleeve) → Open Hydrocyclone Simulator →

🔎 INSTANT ZERO-OEM DROP-IN GEOMETRIC EQUIVALENCE VERIFIER (ISO 2768-m) Enter the cast code on your current part (e.g. E4147A05, D075C21, E4083, TH48-30):

SMAT-LAB-MARCY-1000 · 🟢 IN STOCK

Marcy-Type Pulp Density Scale with 1000 mL Slurry Cup

🟢 IN DURANGO STOCK (24–72 h)
Drop-In Geometric Triplet: A: Cup ID 105.0 mm | B: Dial OD 254.0 mm | C: Cup Height 185.0 mm ISO 2768-m

Everyday scale (0.76 mm): Calibrated pointer and dial clearance: 0.76 mm (1 ISO/IEC 7810 bank card) for zero-parallax direct reading

SAT CFDI 4.0: UNSPSC 41111500 · Unit H87 (Piece) · CFDI Use I04 ⚡ Petty Cash < 25,000 MXN (CFDI 4.0 Today) · SAP PO > 25,000 MXN
💬 1-Click WhatsApp Quote / Order
View Full Sheet & X-Ray → + RFQ Dossier
SMAT-LAB-VASO-1000 · 🟢 IN STOCK

1000 mL Calibrated 304 Stainless Steel / Acrylic Cup for Marcy Pulp Scale

🟢 IN DURANGO STOCK (24–72 h)
Drop-In Geometric Triplet: A: Inner ID 100.0 mm | B: Outer OD 104.0 mm | C: Overflow Height 165.0 mm ISO 2768-m

Everyday scale (0.76 mm): 1.52 mm stainless steel wall (2 ISO/IEC 7810 bank cards) dent-resistant during plant slurry sampling

SAT CFDI 4.0: UNSPSC 41121800 · Unit H87 (Piece) · CFDI Use G03 ⚡ Petty Cash < 25,000 MXN (CFDI 4.0 Today) · SAP PO > 25,000 MXN
💬 1-Click WhatsApp Quote / Order
View Full Sheet & X-Ray → + RFQ Dossier
SMAT-LAB-TAMIZ-E11 · 🟢 IN STOCK

8" ASTM E11 Certified Stainless Steel Test Sieves (#100 to #635 Mesh)

🟢 IN DURANGO STOCK (24–72 h)
Drop-In Geometric Triplet: A: Sieve ID 203.2 mm (8") | B: Rim OD 210.0 mm | C: Full Height 50.8 mm (2") ISO 2768-m

Everyday scale (0.76 mm): Mesh #200 opening (75 µm) = 1/10th the thickness of 1 ISO/IEC 7810 bank card (0.76 mm)

SAT CFDI 4.0: UNSPSC 41104800 · Unit H87 (Piece) · CFDI Use G03 ⚡ Petty Cash < 25,000 MXN (CFDI 4.0 Today) · SAP PO > 25,000 MXN
💬 1-Click WhatsApp Quote / Order
View Full Sheet & X-Ray → + RFQ Dossier
SMAT-LAB-ROTAP-MECH · 🟡 BATCH

Orbital Mechanical Sieve Shaker with Tapping Hammer (Ro-Tap Style) for 8" Sieves

🟡 SCHEDULED BATCH ORDER (2–4 wks)
Drop-In Geometric Triplet: A: Sieve Stack 203.2 mm (8") | B: Base 710.0 mm | C: Height 640.0 mm ISO 2768-m

Everyday scale (0.76 mm): Hammer tap drop clearance: 1.52 mm (2 ISO/IEC 7810 bank cards) for repeatable tapping impact energy

SAT CFDI 4.0: UNSPSC 41104800 · Unit H87 (Piece) · CFDI Use I04 ⚡ Petty Cash < 25,000 MXN (CFDI 4.0 Today) · SAP PO > 25,000 MXN
💬 1-Click WhatsApp Quote / Order
View Full Sheet & X-Ray → + RFQ Dossier
SMAT-LAB-PLATO-TENT · 🟢 IN STOCK

Metallurgical Panning Dish with Rougher Riffles for Flotation & Gravity Control

🟢 IN DURANGO STOCK (24–72 h)
Drop-In Geometric Triplet: A: Bottom ID 180.0 mm | B: Top OD 355.6 mm (14") | C: Depth 76.2 mm ISO 2768-m

Everyday scale (0.76 mm): Concentrating riffle step: 1.52 mm (2 ISO/IEC 7810 bank cards) to trap heavy sulfides and free gold

SAT CFDI 4.0: UNSPSC 41104800 · Unit H87 (Piece) · CFDI Use G03 ⚡ Petty Cash < 25,000 MXN (CFDI 4.0 Today) · SAP PO > 25,000 MXN
💬 1-Click WhatsApp Quote / Order
View Full Sheet & X-Ray → + RFQ Dossier
SMAT-LAB-PULV-DISC · 🟡 BATCH

Laboratory Disc Pulverizer & High-Chrome Replacement Grinding Discs

🟡 SCHEDULED BATCH ORDER (2–4 wks)
Drop-In Geometric Triplet: A: Bore ID 50.8 mm | B: Disc OD 203.2 mm (8") | C: Thickness 28.5 mm ISO 2768-m

Everyday scale (0.76 mm): Micrometer gap between stationary and rotating discs: 0.76 mm (1 ISO/IEC 7810 bank card) for #200 mesh discharge

SAT CFDI 4.0: UNSPSC 41102900 · Unit H87 (Piece) · CFDI Use I04 ⚡ Petty Cash < 25,000 MXN (CFDI 4.0 Today) · SAP PO > 25,000 MXN
💬 1-Click WhatsApp Quote / Order
View Full Sheet & X-Ray → + RFQ Dossier
SMAT-LAB-FILTRO-BATCH · 🟢 IN STOCK

Laboratory Batch Pressure Filter (100 psi) in Stainless Steel with Tilting Stand

🟢 IN DURANGO STOCK (24–72 h)
Drop-In Geometric Triplet: A: Chamber ID 203.2 mm (8") | B: Flange OD 245.0 mm | C: Barrel Height 254.0 mm ISO 2768-m

Everyday scale (0.76 mm): O-ring sealing gasket compressed 1.52 mm (2 ISO/IEC 7810 bank cards) for 100 psi pneumatic tightness

SAT CFDI 4.0: UNSPSC 41104900 · Unit H87 (Piece) · CFDI Use I04 ⚡ Petty Cash < 25,000 MXN (CFDI 4.0 Today) · SAP PO > 25,000 MXN
💬 1-Click WhatsApp Quote / Order
View Full Sheet & X-Ray → + RFQ Dossier
SMAT-PUMP-IMP-AH · 🟢 IN STOCK E4147 · D3147 · F6147

Closed 5-Vane Slurry Pump Impeller in 27% High Chrome (A05) / R55 Elastomer

🟢 IN DURANGO STOCK (24–72 h)
Drop-In Geometric Triplet: A: Thread ID 63.5 mm | B: OD 546.0 mm | C: Width 124.0 mm ISO 2768-m

Everyday scale (0.76 mm): Recommended front axial clearance: 0.76 mm to 1.50 mm (1 to 2 ISO/IEC 7810 bank cards)

SAT CFDI 4.0: UNSPSC 40151510 · Unit H87 (Piece) · CFDI Use G03 ⚡ Petty Cash < 25,000 MXN (CFDI 4.0 Today) · SAP PO > 25,000 MXN
💬 1-Click WhatsApp Quote / Order
View Full Sheet & X-Ray → + RFQ Dossier
SMAT-PUMP-WETKIT-554 · 🟢 IN STOCK E4147 · D3147 · F6147 · D3110 · E4083 · D4018 · E4132

Synchronized 5:5:4 Wet-End Overhaul Lot (Impeller + Volute + Throatbush + Liner Plates)

🟢 IN DURANGO STOCK (24–72 h)
Drop-In Geometric Triplet: A: Suction ID 152.4 mm | B: Volute OD 685.0 mm | C: Stack 246.5 mm ISO 2768-m

Everyday scale (0.76 mm): Guaranteed axial interference tolerance: ±0.38 mm (half an ISO/IEC 7810 bank card)

SAT CFDI 4.0: UNSPSC 40151725 · Unit H87 (Piece) · CFDI Use G03 ⚡ Petty Cash < 25,000 MXN (CFDI 4.0 Today) · SAP PO > 25,000 MXN
💬 1-Click WhatsApp Quote / Order
View Full Sheet & X-Ray → + RFQ Dossier
SMAT-PUMP-EXPELLER-KIT · 🟢 IN STOCK D4028 · D4029 · DAM028 · EAM028 · D075C21

Centrifugal Dry-Seal Kit (Dynamic Expeller + Expeller Ring + D075C21 HVOF Shaft Sleeve)

🟢 IN DURANGO STOCK (24–72 h)
Drop-In Geometric Triplet: A: Shaft ID 75.0 mm (H7) | B: Chamber OD 368.0 mm | C: Sleeve Length 165.0 mm ISO 2768-m

Everyday scale (0.76 mm): Eliminates 100% of gland seal water with 1.52 mm radial clearance (2 ISO/IEC 7810 bank cards)

SAT CFDI 4.0: UNSPSC 40151725 · Unit H87 (Piece) · CFDI Use G03 ⚡ Petty Cash < 25,000 MXN (CFDI 4.0 Today) · SAP PO > 25,000 MXN
💬 1-Click WhatsApp Quote / Order
View Full Sheet & X-Ray → + RFQ Dossier
SMAT-PUMP-BRG-005M · 🟢 IN STOCK DAM005 · D075C21

Complete Bearing Assembly Cartridge (005M) with SAE 4140 Shaft & Labyrinth Seals

🟢 IN DURANGO STOCK (24–72 h)
Drop-In Geometric Triplet: A: Shaft OD 75.0 mm | B: Barrel OD 260.0 mm | C: Overall Length 620.0 mm ISO 2768-m

Everyday scale (0.76 mm): Pre-calibrated internal axial endplay and micrometer adjusting screw for 0.76 mm clearance (1 ISO/IEC 7810 card)

SAT CFDI 4.0: UNSPSC 31171500 · Unit H87 (Piece) · CFDI Use G03 ⚡ Petty Cash < 25,000 MXN (CFDI 4.0 Today) · SAP PO > 25,000 MXN
💬 1-Click WhatsApp Quote / Order
View Full Sheet & X-Ray → + RFQ Dossier
SMAT-PUMP-LINERS-AH · 🟢 IN STOCK E4083 · D4018 · E4132 · D3110

Suction Throatbush, Frame Plate Liner Inserts (FPL) & Volute Liners in Cr27 / R55 Rubber

🟢 IN DURANGO STOCK (24–72 h)
Drop-In Geometric Triplet: A: Suction ID 152.4 mm | B: Seat OD 438.0 mm | C: Depth 88.5 mm ISO 2768-m

Everyday scale (0.76 mm): Precision-ground front face for 0.76 mm axial clearance calibration (1 ISO/IEC 7810 bank card)

SAT CFDI 4.0: UNSPSC 40151725 · Unit H87 (Piece) · CFDI Use G03 ⚡ Petty Cash < 25,000 MXN (CFDI 4.0 Today) · SAP PO > 25,000 MXN
💬 1-Click WhatsApp Quote / Order
View Full Sheet & X-Ray → + RFQ Dossier
SMAT-CYC-D6-D20 · 🟢 IN STOCK

Complete Hydrocyclone Assembly (D6 to D20) & Sintered Silicon Carbide (SiC) Apex / Vortex Spigots

🟢 IN DURANGO STOCK (24–72 h)
Drop-In Geometric Triplet: A: Apex Bore du 50.8 mm | B: Cylinder ID Dc 254.0 mm (D10) | C: Insert Length 340.0 mm ISO 2768-m

Everyday scale (0.76 mm): Seamless inter-cone step alignment (δ_r ≤ 0.76 mm, 1 ISO/IEC 7810 card) to prevent roping and coarse bypass

SAT CFDI 4.0: UNSPSC 20122000 · Unit H87 (Piece) · CFDI Use G03 ⚡ Petty Cash < 25,000 MXN (CFDI 4.0 Today) · SAP PO > 25,000 MXN
💬 1-Click WhatsApp Quote / Order
View Full Sheet & X-Ray → + RFQ Dossier
SMAT-COUPLED-PUMP-CYC · 🟢 IN STOCK E4147 · D3110 · E4083 · D4018

Coupled Slurry Pump + Hydrocyclone Package (4x3+D10, 6x4+D15 & 8x6+D20) 5:5:4 Synchronized

🟢 IN DURANGO STOCK (24–72 h)
Drop-In Geometric Triplet: A: Pump Suction 152.4 mm | B: Volute OD 685.0 mm | C: D15 Cyclone 380.0 mm ISO 2768-m

Everyday scale (0.76 mm): Simultaneous axial clearance (0.76 mm, 1 ISO/IEC 7810 card) and SiC apex calibration to sustain ΔP = 8–15 psi

SAT CFDI 4.0: UNSPSC 40151510 · Unit H87 (Piece) · CFDI Use G03 ⚡ Petty Cash < 25,000 MXN (CFDI 4.0 Today) · SAP PO > 25,000 MXN
💬 1-Click WhatsApp Quote / Order
View Full Sheet & X-Ray → + RFQ Dossier
SMAT-SCR-TH48-30 · 🟢 IN STOCK

TH48-30 High-Frequency Fine Urethane Screens with Anti-Blinding Relief Angle

🟢 IN DURANGO STOCK (24–72 h)
Drop-In Geometric Triplet: A: TH48 Width 1219.2 mm (48") | B: Length 762.0 mm (30") | C: Thickness 25.4 mm ISO 2768-m

Everyday scale (0.76 mm): Aperture slot from 0.15 mm to 0.76 mm (1 ISO/IEC 7810 bank card) featuring a 3°–5° conical relief angle

SAT CFDI 4.0: UNSPSC 20122800 · Unit H87 (Piece) · CFDI Use G03 ⚡ Petty Cash < 25,000 MXN (CFDI 4.0 Today) · SAP PO > 25,000 MXN
💬 1-Click WhatsApp Quote / Order
View Full Sheet & X-Ray → + RFQ Dossier
SMAT-SCR-MOD-1X1 · 🟢 IN STOCK

1' x 1' (305 x 305 mm) Modular Polyurethane Screen Panels with Pin-and-Sleeve Fastening

🟢 IN DURANGO STOCK (24–72 h)
Drop-In Geometric Triplet: A: Pitch 304.8 mm (1') | B: Width 304.8 mm (1') | C: Thickness 30.0 mm ISO 2768-m

Everyday scale (0.76 mm): Inter-module sealing interference: 0.76 mm (1 ISO/IEC 7810 bank card) for zero coarse bypass

SAT CFDI 4.0: UNSPSC 20122800 · Unit H87 (Piece) · CFDI Use G03 ⚡ Petty Cash < 25,000 MXN (CFDI 4.0 Today) · SAP PO > 25,000 MXN
💬 1-Click WhatsApp Quote / Order
View Full Sheet & X-Ray → + RFQ Dossier
SMAT-FILT-CLOTH-PLATE · 🟡 BATCH

Calendered Filter Press Cloths & Recessed / Membrane Polypropylene Plates (16 bar)

🟡 SCHEDULED BATCH ORDER (2–4 wks)
Drop-In Geometric Triplet: A: Plate Width 1200.0 mm | B: Height 1200.0 mm | C: Plate Thickness 70.0 mm ISO 2768-m

Everyday scale (0.76 mm): Sealing rim flatness ≤ 0.38 mm (half an ISO/IEC 7810 card) and 0.76 to 1.15 mm calendered cloth weave

SAT CFDI 4.0: UNSPSC 40161500 · Unit H87 (Piece) · CFDI Use G03 ⚡ Petty Cash < 25,000 MXN (CFDI 4.0 Today) · SAP PO > 25,000 MXN
💬 1-Click WhatsApp Quote / Order
View Full Sheet & X-Ray → + RFQ Dossier
SMAT-FILT-SHIFTER-CHAIN · 🟢 IN STOCK

Filter Press Plate Shifter Mechanism, Catcher Pawls, Sprockets & Drive Chains

🟢 IN DURANGO STOCK (24–72 h)
Drop-In Geometric Triplet: A: Chain Pitch 38.1 mm | B: Sprocket OD 165.0 mm | C: Carriage 420.0 mm ISO 2768-m

Everyday scale (0.76 mm): Guide rail lateral clearance calibrated to 1.52 mm (2 ISO/IEC 7810 bank cards) for jam-free plate indexing

SAT CFDI 4.0: UNSPSC 40161500 · Unit H87 (Piece) · CFDI Use G03 ⚡ Petty Cash < 25,000 MXN (CFDI 4.0 Today) · SAP PO > 25,000 MXN
💬 1-Click WhatsApp Quote / Order
View Full Sheet & X-Ray → + RFQ Dossier
SMAT-FLOT-MECH-18SP · 🟡 BATCH

Suspended Flotation Mechanism (#18 SP / #24 / #30) & Polyurethane Drop-In Rotor + Stator Kit

🟡 SCHEDULED BATCH ORDER (2–4 wks)
Drop-In Geometric Triplet: A: Shaft Flange ID 114.3 mm | B: Rotor OD 610.0 mm | C: Height 420.0 mm ISO 2768-m

Everyday scale (0.76 mm): Rotor/stator radial gap calibrated within 1.52 mm (2 ISO/IEC 7810 bank cards) to sustain Sb ≥ 55 s⁻¹ (Gorain 1997)

SAT CFDI 4.0: UNSPSC 20121900 · Unit H87 (Piece) · CFDI Use I04 ⚡ Petty Cash < 25,000 MXN (CFDI 4.0 Today) · SAP PO > 25,000 MXN
💬 1-Click WhatsApp Quote / Order
View Full Sheet & X-Ray → + RFQ Dossier
DURANGO TEST RIG & INSPECTION

What We Test on Shop Bench

Every component dispatched undergoes rigorous dimensional and physical verification in our Durango facility prior to site shipment.

  • Dynamic Balancing: ISO 1940 Grade G2.5 shop balanced to prevent bearing vibration.
  • 1:1 Bolt Alignment: Template verification ensuring exact bolt-hole match with existing plant housings.
  • Axial Clearance Check: Precise 0.75 mm clearance set to avoid internal recirculating erosion.
OEM FOUNDRY METALLURGY

What Manufacturing Covers

Certified casting integrity backed by chemical spectrometry and ultrasonic non-destructive testing at partner foundries.

  • ASTM A532 Alloy: High Chrome 27% Cr (>650 HB hardness) certified chemistry per batch.
  • Casting Flaws: 100% replacement warranty against internal blowholes, porosity or shrinkage.
  • Vulcanized Bond: High-resilience natural rubber with verified steel-substrate bonding.
HONEST TECHNICAL BOUNDARIES

When We Decline to Quote

Protecting your concentrator plant means knowing our operating limits. We never compromise safety for a blind sale.

  • 1. Pumping / Cavitation: We decline quotes if suction NPSHa is severely deficient without piping redesign.
  • 2. Flotation / Instability: We reject supply if excessive airflow rate destroys the quiescent mineral froth layer.
  • 3. Filtration / Cloth Blinding: We decline standard filter cloths if ultrafine clay tailings lack conditioning.

Quality Protocol: We do not quote blindly or compromise the safety of your operation. View our technical limits and warranty protocol →