SMAT-PUMP-WETKIT-554 · BOMBEO · GATE G2 🔴 Mechanical Hoist Required (> 23.0 kg NOM-036-1-STPS)
Dry Mass: 202 kg
Synchronized 5:5:4 Wet-End Overhaul Lot (Impeller + Volute + Throatbush + Liner Plates)
Master wet-end overhaul lot synchronized under the empirical 5:5:4 wear ratio in 27% High Chrome or Hybrid architecture (A05 Impeller + R55 Liners) for single-window maintenance.
Zero-OEM Drop-In Cross Reference
SMAT-PUMP-WETKIT-554 (Impulsor E4147/D3147 + Voluta D3110 + Cuello E4083 + Plato D4018/E4132)
Certified Metallurgy / Hardness
≥ 650 HB (58–62 HRC, Certificado ASTM A532) / Híbrido A05 + Elastómero R55 (55 Shore A)
Everyday Calibration Scale (ISO/IEC 7810)
Guaranteed axial interference tolerance: ±0.38 mm (half an ISO/IEC 7810 bank card)
5-5-4 WET-END KIT COMPARISON • HIGH CHROME (≥650 HB) VS. NATURAL RUBBER VS. POLYURETHANE CAD 1:1 • ISO 7810 CARD REF (0.76 MM)
📋 How to Validate Your Part in Plant in 3 Steps (Zero Downtime Risk)
- STEP 1 · CAST / TAG CODE Check the identifier on your equipment (E4147, D3147, F6147, D3110, E4083, D4018, E4132) or send us a yard photo via WhatsApp.
- STEP 2 · TRIPLET (A, B, C) Confirm with caliper or tape: A: Suction ID 152.4 mm | B: Volute OD 685.0 mm | C: Stack 246.5 mm (ISO 2768-m).
- STEP 3 · 0.76 MM SCALE During assembly, set clearance or seating using 1 standard ISO/IEC 7810 bank card (0.76 mm).
Recommended Metallurgical Operating Window
Slurry Density (Marcy SG)
1.3 – 1.9 t/m³
Plitt Cut Size d50c
80 – 500 µm
Typical Wear Life (Weibull)
2400 – 4800 h